Joined
·
21 Posts
well actually i work at Crower, and i know that we can do some mild grinds on the cams. but as for getting new ones made, its gonna be a custom job. and will run u a large amount of money
cams
Join the discussion
Recommended Reading
-
Looking for a progressive spring rate coil over kit for an 87.
MKIII TechnicalI didn't want to sacrifice the ride quality and I had all the factory suspension rebuilt and painted.... as I am building a luxury Grand Tourer. Plus I want to keep it fairly stock looking. Unfortunately over time I have accepted that the stance is just wrong. Way too much room in the wheel...- 0
- 51
-
My Supra Build (Need suggestions)
MKIII TechnicalI bought myself an 89' Supra N/A that had sat for 14 years in a drive shed without moving. Miraculously it started up without even needing a boost. As my build comes together slowly (thanks to tons of information I've found here and on Supramania). I'm finally at the point where I need to...- 2
- 301
-
ECUMASTERS EMU 7MGTE PnP help
MKIII TechnicalI bought this car running a 7M harness on a 2JZ-GE motor (SAFC2). It came with an ECUMASTERS EMU stand-alone with a PnP adapter. I asked the original owner why it wasn’t hooked up and he said he could never figure out how to make it work. The PnP adapter has bridged connections and I need some...- 0
- 56
-
BellsMK3 · updated
-
No spark on my 7mge
MKIII TechnicalMy 7mge does not throw a spark. I cleaned the intake and the valve covers, and changed the spark plug wires. After assembling, the engine did not start due to lack of spark, check the coil, relay, and ecu, all are running. What could be the problem? Any help is appreciated.- 3
- 114
-
1987 na supra atuomatic to manual swap.
MKIII TechnicalSo a little back information on this car. My son and I picked it up when he was 15 and now he is 20. There are a few threads on how we brought the car back to life and have done other things. here is one. https://www.supraforums.com/threads/87-supra-part-3-paint-the-car.1109813/post-13837471 So...- 3
- 195
-
1933beer · updated
Join now to ask and comment!