Supra Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1,137 Posts
Discussion Starter #1
Ok, so i got my new pads and my rotors. first problem is i can't get the torque plate off the caliper. I need to get it off, but i don't know why it doesn't. This is my front right wheel. My Front left wheel is fine and the pads are on there and it moves fine. It's just the pads didn't come with all that extra squeel crap. So i'll need to pick all that crap up. Well to get to the point about that fron right wheel, i can't get the torque plate to close with the pads in the caliper. Pads are stopping it. Don't know why not? About the clutch. I'm worried about pulling the tranny and replacing the clutch for the first time. I got a used OEM clutch with a pressure plate, throwout bearing, and a clutch disc all with under 5k. Do i need to get anything resurfaced if it's been used? And also what other stuff do i need? Everyone who knows alot of brakes and clutches. Please post your AIM name so i can chat...It's faster...My Aim name is KillazGT
 
1 - 1 of 1 Posts
Top