Clutch evaluations | Supra Forums

1 - 1 of 1 Posts

W

wate783

·

Guest

Joined Jan 1, 1970

·

0 Posts

Discussion Starter • #1 • Mar 24, 2002

Does anyone have any feedback on these three clutches in terms of noise and streetability?

1) RPS stage 3 w/ mueller lightened flywheel
2) TRD twin disc clutch
3) HKS triple disc clutch

I was considering the TRD clutch, but I've heard that the noise is unbearable. Could anyone rate these clutches by how noisy they are? Thanks a lot.

1 - 1 of 1 Posts

Recommended Reading

Rear ABS sensors

MKIV Technical

Hi guys, During my subframe restoration I broke both of my rear abs sensors. They were seized in the hub. It seems they are impossible to find in Europe. I'm wondering if the sensors from another model fit the Supra. For example the sensors from the Rav4 and Yaris look almost identical in the...
- 2
- 150
- CasperMK2 · updated 1 h ago
Traction Control

MKIV Technical

Hi, Just traded for my first manual 94 Supra Twin. I checked all of the vin tags and confirmed it is a twin. My car does not come with the traction switch in the console. I'm not sure if the previous owner removed it or if it was an option for the dealer. Can anyone confirm if this?
- 2
- 62
- M
  Mynillas · updated 19 h ago
2jzgte vvti head porting, opinions please

MKIV Technical

Hi everyone, I’ve been reading supra forums for months and months now. Love this page, and this is my first post. I’m about to port my vvti head and I have some questions pertaining to the valve guides. So, assuming my guides are within spec (it’s a low mile motor), what are your professional...
- 2
- 113
- 2JZ GT86 · updated 24 h ago
Misfire issue, need some advice.

MKIV Technical

Note: Car was perfectly fine before it’s last wash getting it ready for a photo shoot.(engine bay was sprayed with water). So I’m driving to the photo shoot location and I start noticing a misfire. The longer I drove it progressively got worse to the point where I would just get pretty good...
- 0
- 62
- JustA2jz · updated 1 d ago
Banjo bolt on fuel pump won't budge - ok to use impact wrench?

MKIV Technical

Greetings, I'm having trouble removing the banjo bolt on the fuel pump assembly. Tried everything I could think of besides an impact wrench. Wanted to ask some folks if that was a good idea or not? I'd really appreciate any insight you can offer. To be clear and avoid miscommunication I found...
- 1
- 69
- R
  RushTurbo · updated 2 d ago