[ma70ltd]

Hi all,

I remember there was a thread out there on how to make your own sway bar end links. It told you what parts to get and a step by step on how to build them.

Anyone got threads or links to web pages on how to do this please?

Thanks in advance
(Search is broken)

 

[Mr. Sinister]

becauseican sells them. I'd just buy them from him.

 

[Zach90Turbo]

Dr. Jonez has a good writeup on them on mkiiitech.com. Just hop over there and search for them.

 

[ma70ltd]

I've had a search around on mkiiitech, but no luck.

Can you point me in the right direction Zach90Turbo?


Thanks
Sam

 

[Supranforever]

According to Adam over @mk3tech
Some part numbers from McMaster-Carr to build your own big pimpin' sway bar endlinks:

-SS rod end (RH thread): 59915K274
-SS rod end (LH thread): 59915K242
-Al connecting rod (may need to vary length, try 4" for rear and 3" for front): 8419K13
-SS jam nut (RH thread): 91847A431
-SS jam nut (LH thread): 94450A260
-Al standoff: 92510A795

 

[drjonez]

I've had a search around on mkiiitech, but no luck.

Can you point me in the right direction Zach90Turbo?


Thanks
Sam

how hard is it?

click search

type in "endlink" or "sway bar"

thread comes up.

http://www.mkiiitech.com/forums/viewtopic.php?t=806

or even easier, goto the section labeled "suspension"

you can lead a horse to water....

 

[Supranforever]

how hard is it?

click search

type in "endlink" or "sway bar"

thread comes up.

http://www.mkiiitech.com/forums/viewtopic.php?t=806

or even easier, goto the section labeled "suspension"

you can lead a horse to water....

Did I not qoute you on the right thing Doc?

 

[87supraturbo2]

Did I not qoute you on the right thing Doc?

I think he was referring to ma70ltd not being able to locate the thread on MKIII Tech via the search.

-Matt

 

[drjonez]

I think he was referring to ma70ltd not being able to locate the thread on MKIII Tech via the search.

-Matt

you are correct sir!