Supra Forums banner
1 - 4 of 4 Posts

·
Hardtopper Once Again!
Joined
·
1,709 Posts
Discussion Starter · #1 ·
I am in the process of installing my defi control unit and am unsure as to were to wire the white and orange wires. I tried searching and a couple people said all the wires could be tapped into the clock clip. Now my question is, what wires do I solder together from the control unit to the clock?

Defi:
White- Illumination
Orange- Ignition
Red- Power to battery
Black- Ground

Clock:
Red
White/Black
Green/Orange
Blue/Red

If you have any other suggestions as to where I can connect these wires please let me know. I know I can connect to the radio but would rather use the clock as a couple other people have said they had done.

Thanks in advance,
Dave
 

·
Hardtopper Once Again!
Joined
·
1,709 Posts
Discussion Starter · #3 ·
Thanks for posting the chart. I think I know where to wire them up now.

Dave
 

·
Registered
Joined
·
1,091 Posts
why dont you just wire them straight to the fuse box..but use a piggy back fuse holder thing. It plugs into the original fuse location..but has 2 fuses in it...one for the original use..and one with a wire coming out of it to do with it what you wish...This way you have a seperate fuse just for the gauges.

I guess it doesnt really matter..just a reccomendation..thats what i did though.
 
1 - 4 of 4 Posts
Top