D
dza
·Guest
Joined
·
0 Posts
all i need is in the subject line, thanks
oh and i'm only interested to know if the MKIV's do
oh and i'm only interested to know if the MKIV's do
Do N/A's come with removable targa tops?
1 - 5 of 5 Posts
Joined
·
1,005 Posts
Yes.
D
dza
·Guest
Joined
·
0 Posts
thanks, do all MKIV's come with that, or do some have straight up hard tops.
Joined
·
1,005 Posts
Some are hardtops(more rare) and some are targa tops
Joined
·
316 Posts
yes, hard tops are more rare
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
New spa GE turbo manifold
Naturally AspiratedJust picked up spa's newly redesigned 2jzge cast turbo manifold. It came in today and i got some pics and some feedback for anyone who may be interested. So spa says this will clear the dizzy which doesn't matter for me as I am building a vvti head. The piece looks well made not too much garbage...- 7
- 3K
-
audi2nr · updated
-
Best EGT sensor (rtd type) location for NA-T?
Naturally AspiratedHi guys (and gals), Where have you folks installed your single egt sensor and how well did it work? I have a 2JZ-GE na-t car (non-vvti) and am curious where is the best place to weld in my AEM egt sensor (rtd type) bung. [easy access vs accurate readings... closer to an exhaust valve is more...- 3
- 73
-
2JZ-GE NA Running 14:1+ Compression
Naturally AspiratedWe are building SC300 with a 2JZ-GE NA for a Bonneville Land Speed record attempt. We're working through all the engine mods including a lot of head work. Based on the regulations we will need to run VP Racing Fuel C14. Possibly C14+ but it's unclear if that will pass tech. Does anyone have...- 10
- 405
-
IP Hexa Pac Ignition coils
Naturally AspiratedSo I am considering doing the COP conversion and not messing with the dizzy at all during an NA-T install. I just so happened to stumble upon these and couldn't find any info or anyone that had used them in the search...- 1
- 100
-
TougeSC3 · updated
-
IS300 Coil Pack brackets for NA Supra?
Naturally AspiratedHi supraforum'ers, Does anyone know where I can buy some simple brackets that secure the IS300 coil packs in our non-vvti 2JZ-GE engines? I performed this coil pack conversion from a distributor cap and am planning a road trip, so I prefer them to be bolted down in a secure manner. :)- 3
- 191
Join now to ask and comment!