Supra Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,002 Posts
Discussion Starter · #1 · (Edited)
Does anyone here have shoot peened and beam polished stock rods?

I was doing some reading on the bb but couldn't come up witht anything. The motor that we are having built is going to have the above mentioned rods installed. I see that some guys have pushed the stock bottom to ~1000rwhp. I don't plan on going over 700 ever or at least anytime soon so i felt the stockers were ok. Anyway i was wondering if the stockers are good for 800hp or so wich it seems they are does anyone know how much more power can be ran through polished rods?
 

·
Registered
Joined
·
833 Posts
not sure, my friend has a 264 exhaust cam polished and a stocker intake cam polished. his engine is going to be pretty close to a 1000hp. i think the stock cams are good for like 750-800 hp though.
 

·
Registered
Joined
·
1,002 Posts
Discussion Starter · #3 ·
twntrbo03' said:
not sure, my friend has a 264 exhaust cam polished and a stocker intake cam polished. his engine is going to be pretty close to a 1000hp. i think the stock cams are good for like 750-800 hp though.


um i was inquiring about shoot peened and beam polished stock rods :stickpoke does he have these rods? :)
 
1 - 3 of 3 Posts
Top