Here is a link that shows my stock twin dyno chart at 432rwhp with my SP63 dyno chart with 526rwhp. You will need to copy and paste the link for it to work.
Are you guys using a sensor ground for your bcc or chassis ground? I don't want to cut my harness so came up with this rough contraption. Something so simple yet 14-15 lbs boosts cuts every time. I started at 4.30v, kept turning it down after pulls to see if that was the case and nope still...
Will be installing 272 BC cams, springs, retainers, keepers and of course those pesky oem seals.
Still a bit confused on when I need to put motor at TDC since I am doing the "rope trick" does this matter?
So would you do shimless buckets like this?
Please correct if wrong.
1.Remove the...
So my odometer stopped working and i have resoldered it 2 times and everytime, it starts counting for about 5km and then stopps again. I have done the splice mod on the connector on the back also have tried putting it back to original and also tried removing my speedo converter but it didnt...
I came across asking myself today, do you need a igniter when you go to a aftermarket ECU and Harness? I noticed my friend is running a MOTEC and does not have one for his car.
rallly · updated 
Kennygee · updated 
Marcus.supra · updated 
