S
SUPRA500
·Guest
Joined
·
0 Posts
is it possible to pass the emission test without the egr system with stock exhaust system in the ca or us? any values?
thanks
Markus
thanks
Markus
emission test in ca without egr system
1 - 3 of 3 Posts
Joined
·
1,476 Posts
You might squeek by in D.C. When I was registered there they "goosed" the tailpipe & it passed. I was running a header & no converter at the time. I MD., I don't recall them looking under the hood. Hmmm, I guess if the #s look good they don't visual in some places!
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
HELP PLEASE- OPEN DOOR CHIME ALWAYS ON
MKIV TechnicalHi everyone. I have a strange problem. The sound that comes on when the door is open is always on. It's a 1995 Twin Turbo 6 speed. It's been a month now and I brought it to Toyota and the tech thought it was the switch under the ignition. (part number 84052-41010) I found a new one and...- 3
- 69
-
Overheating issue
MKIV TechnicalSo over the winter I installed a new mishimoto x-line radiator and the mishimoto dual fan shroud with fans, and a derale dual fan controller. It was great and didn’t overheat until the temperature started getting warm outside. Now driving on the freeway @ 70mph it’s starting to overheat. I’ve...- 20
- 282
-
NTLONUF · updated
-
LSD recommendation?
MKIV TechnicalI have been out of the scene for 8 years or so, and my '95 MKIV has been in storage for the last 6 years or so, but I am getting ready to bust her back out and get the beast rolling again. That said, when I put it in storage I knew I needed a LSD due to the turbo upgrade I gave it... but now the...- 15
- 369
-
New Wheel & Tire fitment guide.
MKIV TechnicalPlease send me an e-mail if you would like a copy of the spreadsheet. [email protected] Later, Steve- 1K
- 237K
-
Steve Jarvis · updated
-
Aem v2 auto 02v02 conversion to 01v24 fuel pump issue
MKIV TechnicalHello there, Conversion from 02v02 to 01v24 - after that fuel pump stop working If i go back to 02v02 works just fine Another thing - on 01v24 - If i plug only A ecu connector, pump works, but when i plug B ecu connector just stops Please help Thanks in advance- 0
- 23
Join now to ask and comment!