Supra Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
128 Posts
Discussion Starter · #1 ·
Gents,

Does anybody have any advice on how to get to the top bolts of the engine mounts?

I have a 1994 Auto TT RHD (UK) and I am in the process of replacing my engine mounts and trans mounts as I am getting some vibration. Looking at the mounts the bottom bolts are really easy to get to but the top ones look impossible. Any advice?

Any other advice on engine/trans mounts also appreciated. Pics because why not.

Thanks!

Wheel Tire Car Vehicle Motor vehicle


Hat Flash photography Tints and shades Helmet Personal protective equipment


Automotive tire Automotive design Headgear Sneakers Tints and shades
 

·
Registered
Joined
·
128 Posts
Discussion Starter · #3 ·
No, not the mount brackets. Just the mounts themselves. The upper bolts seem impossible to reach. I decided I'll probably just pull the entire engine later this fall and do it then. Impressive you were able to get to them though.

Thanks for the reply!
 
1 - 2 of 2 Posts
Top