[stoic4now]

I hate doin this but.......Will 18X7 enkie Rsf2's fit on a MKIII?
the bolt pattern is the same
offset is 40
don't know the center bore

 

[stoic4now]

i was attacked by adware while i was writing this post yesterday and didn't get to finish it.
the wheels are made for FF cars(coming off an 02 Altima).
the only thing that worries me is the center bore(which i haven't been able to find for the enkies) and the fact that they're for a FF. anyway....the D side wheels are bent on my car and i can get these relatively cheap which brings me to another ??? how much are they worth used ($125.00 ea new)? 2 of the tires are at the TWI's. i was thinking around $400.00-$450.00 for the set.

Yes

Generaly aftermarket wheels come with a standard oversized Hub( vary by manufacturer), but thats why they have rings you can buy to fit the specific wheel to the car.

18x7 will look funny on the mk3, sunken in, skinny, with a thin tire, what can be more disguisting, NO OFFENSE.

how are the enkies going to look sunken in and skinny? the factory sawblades that are on the car now are 16x7 X245/50 tires the enkies are 18x7 X225/40
so I'll be giving up a little on the overall diameter(wheel+sidewall) and its hard to tell the width by just standing one wheel beside the other but it looks like the 18's are about a 1/8 inch thinner(width) than the 16's
I took some pic W/ my camera but i seem to have some problems converting them for what ever reason so here is what they look like( if this link works)

http://www.wheelsnext.com/product.phtml?p=606

anyway thanks for the opinions
stoic

 

[stoic4now]

WOOOO WHOOOO. i figured out how to do the camera phone thing)sorta(
sux that i have to go from a jpeg to a bmp and back (they're bieng mislabled somehow) but anyway.... .... here the pic. im trying 2 urls so bear with me .

[/URL][/IMG]

[/IMG]