Supra Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
3,647 Posts
stoic4now said:
I hate doin this but.......Will 18X7 enkie Rsf2's fit on a MKIII?
the bolt pattern is the same
offset is 40
don't know the center bore
Yes

Generaly aftermarket wheels come with a standard oversized Hub( vary by manufacturer), but thats why they have rings you can buy to fit the specific wheel to the car.

18x7 will look funny on the mk3, sunken in, skinny, with a thin tire, what can be more disguisting, NO OFFENSE.
 

· Registered
Joined
·
3,647 Posts
18x7 +40 = Sunken in. Forget about tire size for now. Think about it this way, instead of upgrading width wise your upgrading height wise even though you are going to maintain your stock wheel aspect ratio( at least i hope so) the wheel will not look right. now add the tires, they are going to be lower pros so they will enhance the skinny look.
 

· Registered
Joined
·
3,647 Posts
why not go with a nice light weight 16x7 since your NA. you ca put some nice tires too. i know those perticular enkies are light but why add the additional rotating mass, especially if your not adding any more power.
like NJsupramk3tb said IS RICE
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top