i have a turbo exhaust housing that has been damaged by the exit of the turbine. the ceramic turbine amazingly has cut chunks out of the cast, leaving a shallow groove and a burr. can it ever b made good? or is it best off in the bin?
exhaust housing damage - repairable?
Join the discussion
Recommended Reading
-
Fuel pressure testing OEM fuel system
MKIV TechnicalHey guys, car won't start.... been troubleshooting for sometime now. What's the easiest way to check my fuel pressure? 94 JDM Supra TT. Thanks! Jay- 3
- 63
-
rallly · updated
-
Holset HX40 for a street a340 Aristo - Good idea?
MKIV TechnicalHey guys! It seems like my 2nd turbo is starting to go so thinking about going single. I don't know that much about turbo's yet hence I'm coming here for help. I found a nice brand new HX40 with a 60/86 billet compressor wheel and a 16cm^2 75/65 exhaust turbine. In the beginning I'd like to...- 2
- 117
-
MrSzyma · updated
-
New Wheel & Tire fitment guide.
MKIV TechnicalPlease send me an e-mail if you would like a copy of the spreadsheet. [email protected] Later, Steve- 1K
- 228K
-
Steve Jarvis · updated
-
VSS issue with AEM Infinity 8
MKIV TechnicalI have the AEM Infinity 8 with the plug n play harness. According to AEM the Vehicle Speed Sensor No.1 maps to pin C1-25 on the AEM ECU. I have read all about the VSS signal and the problems with it going through the Odometer. My speedometer works fine. I have depinned both the pink wire and...- 3
- 1K
-
Lukewarm Heat - WTF?!
MKIV TechnicalHello all. My name's Fred. I've been having an issue with the heat in my RHD 1993 MKIV - NA. I have searched and searched and tried everything that I've seen mentioned on here and other places as well and no improvement. The heat comes out lukewarm in all vents however blows just slightly warmer...- 3
- 150
Join now to ask and comment!