Supra Forums banner
1 - 3 of 3 Posts

· 1JZ BLING
Joined
·
2,101 Posts
I think thats a 2jz manifold. If you look at the flange its not 1jz. Also, the T4 flange isnt even a real flange, its jut a piece of metal with some ugly holes cut in it (probably warped). Plus the guy is in Bangkok.

SOMEONE SHOULD TEST THIS OUT THOUGH =]
 

· 1JZ BLING
Joined
·
2,101 Posts
TiWo2.0 said:
I'm not about to bet anything because I've personally never ordered one from them, but it does say on their website that the stud holes need to be enlarged to bolt to the 1jz.
The site needs to be updated, the manifolds that need modification are no longer being sold. ALL MANIFOLDS SOLD will fit perfectly without any modification.
 

· 1JZ BLING
Joined
·
2,101 Posts
GhstAsssn said:
also any difficulty bolting a garret gt 42 turbo to it. some says that the garrent gt42 compressor housing will not fit. is it true ?
i have no clue. Would anyone like to send me a gt42 so i can test fit it?
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top