Supra Forums banner
1 - 6 of 6 Posts

·
ma70-7m=1JZ
Joined
·
2,602 Posts
Where was it hitting?, was the arm hitting on the bottom of the flanges, or was the flapper hitting the divider plate?. This is why I am making a SP specific ddp. I have the first prototype ready now.

Normally wasetgates dont open up all the way. The stock CT26 flapper only lifts about 3/16" - 1/4" at the most before the arm will hit the stock turbo elbow.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top