[CanuckDave]

- Fully assembled megasquirt 1 pcb 2.2 board. - SOLD

http://www.supraclub.ca/images/forsale/IMG_9711.JPG

test setup running: http://www.supraclub.ca/images/suprabuild/IMG_8458.JPG



- 7M-GE 5 spd. ECU - $20 (known to be working, I pulled it from my NA after it written off)
http://www.supraclub.ca/images/forsale/IMG_9696.JPG



- 7M-GTE injectors (440's) $40
http://www.supraclub.ca/images/forsale/IMG_9718.jpg


- Cometic 1.4mm metal head gasket - SOLD
http://www.supraclub.ca/images/forsale/IMG_9705.JPG


- 5M-GE vacuum advance ignition $ - taking offers
I was going to swap the '82 system to my car, but ended up deciding to go a different route, so now I'm selling
all of it.
- brand new MSD blaster coil
- new toyota cap and rotor
- used distributor
- used ignitor
http://www.supraclub.ca/images/forsale/IMG_9706.JPG
http://www.supraclub.ca/images/suprabuild/IMG_8635.JPG

If you're interested in anythingyou can PM me or email at
[email protected]

 

[SupraFiend]

I could use the injectors but I dont have the cash right now. If they are still available when I do I will take them.

 

[CanuckDave]

Sounds good, just let me know.

 

[blackout_89t]

Just wondering how you have the DB9 cable connected to your laptop.

I have an IBM thinkpad as well (R51) and can not get the usb-to-serial adapter to work correctly with my ms2 v3.0 board.

All I have been able to do so far in the assembly is get it hooked up to my desktop using just a D9 connection.

Thanks for any help...

 

[CanuckDave]

I specifically bought a cheap laptop that had a serial port specifically for this, so I didn't have to worry about a usb adapter. works perfectly with the serial cable though. from what I've heard the usb adapter cable is kind of hit or miss for working.

 

[VanSupra]

pm'd

 

[CanuckDave]

replied

 

[Teraka]

Just wondering how you have the DB9 cable connected to your laptop.

I have an IBM thinkpad as well (R51) and can not get the usb-to-serial adapter to work correctly with my ms2 v3.0 board.

All I have been able to do so far in the assembly is get it hooked up to my desktop using just a D9 connection.

Thanks for any help...

I don't mean to hi-jack the thread, but...

Try using a different brand of usb-to-serial adapter. I deal with customers using them and you'd be suprised how much difference brand makes.

 

[CanuckDave]

yeah, from what I hear the connection with a usb adapter is hit or miss, depends which type you're using.

quick update:
MS board is sold, MHG is tentatively sold, everything else still up for sale.