Supra Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
75 Posts
Discussion Starter #1
Does anyone have information about building the fuel correction display described in Reg Riemer's Tech Note on the Lexus V8 air meter & Lucas 550 cc injector upgrade? I want to build one and couldn't find the information I needed. Also, has anyone actually measured the frequency of the square wave going to the ECU? I'm not sure my current AFM is working properly and wanted to verify it's output.
 

·
Fuzz E. Guy
Joined
·
853 Posts
Send me you e-mail address and I can send you the schematic. Use my work e-mail. It is

[email protected]

Also the schematic was created in pcb123 so you will need to download that if you don't have it.

Scott
 
1 - 4 of 4 Posts
Top