Supra Forums banner

1 - 4 of 4 Posts

·
More torque than you
Joined
·
120 Posts
Discussion Starter #1
Ready to drop in fuel pump hanger with dual walbro 255 high pressure pumps.
6an outlet for the second pump, still has factory vent and return tubes.
Less than 1000 miles on the pumps, upgrading to weldon. Comes with fuel level sender.

$450 outright
$300 plus your stock fuel hanger with fuel level sender without stock pump.
You pay shipping
 

·
Working OT
Joined
·
4,193 Posts
How much Hp will the Walboro's handle? Does this just hook right up to stock equipment got any pics?
 

·
More torque than you
Joined
·
120 Posts
Discussion Starter #3
Each walbro supports about 500 horsepower depending on how much total fuel pressure you're running. Connect stock fuel feed line, stock return line and stock vapor canister line.
You add 1x 6AN feed line from top of fuel hanger to fuel rail or y block(depending on your setup)
As far as electric hookup goes you need to change the stock ground fuel pump wire to a 12v positive wire to the second pump on the hanger and attach a ground strap to the car body.
You're done!
I'll put up pictures 4/25
 

·
Working OT
Joined
·
4,193 Posts
Sounds simple enough. Do you have to add the feed line from the top of the fuel hanger?
 
1 - 4 of 4 Posts
Top