Supra Forums banner

1 - 1 of 1 Posts

·
Registered
1986.5 Toyota Supra
Joined
·
2 Posts
Discussion Starter · #1 ·
So im doing a 2jzge Vvti swap into my 86 Supra and the 7mge that was in previously has a feed and a return fuel line. The 2jz on the other hand that I got from a 1999 lexus gs300 has just the one feed line and nothing else. I banjo bolted the feed line into the rail of the 2jz and that's all taken care of, but the 2jz that I have does not have a place to put the return, ie the lexus only had the sending line and nothing else. Is it fine if I just run the sending fuel line and cut off the 1986s return line?
 
1 - 1 of 1 Posts
Top