J
Jokerzinc
·Guest
Joined
·
0 Posts
How big were they for a 87 turbo?
Fuel Tanks
Join the discussion
Recommended Reading
-
2j swapped mk3 is a DOG on the line
MKIII (1986.5-1992)My father recently picked up an mk3 with a completely stock block 2j/ bw s366 single/ th400 w/trans brake and 4200 stall. Im completely new to the track scene and the th400 scene and have always ran a 6 speed mk4 so hopefully you guys can point me in the right direction. This thing is a complete...- 2
- 41
-
brakes not releasing
MKIII (1986.5-1992)anyone else have a problem with their brakes sticking and not releasing? i can manually release the brake with my hands (i did when i pulled it off and checked it) but when i press in the brake pedal the caliper doesnt release it. what am i looking at here? broken caliper? cinched brake line...- 10
- 629
-
Kracin · updated
-
89+ head specific Quetion
MKIII (1986.5-1992)I finally decided to take my engine apart and replace the stock head gasket with a MHG I personally didn’t have a fail on the head gasket, not sure how many times the previous owner did. I’m the second owner While I’m at it I’m replacing the 30-year-old valve springs, just had to head...- 4
- 79
-
Body connectors for 88 supra 1jz swap
MKIII (1986.5-1992)I am dropping in a 1jz into my 88 supra, the only problem is the wiring to the body harness. I bought a shell so I don't have a 7M engine harness. Does anybody have an alternative other than hardwiring it in? I would hate to have to drop 300 dollars for a harness just to cut off the body plugs...- 2
- 65
-
turbo88 · updated
-
1jzge oil filter housing
MKIII (1986.5-1992)Hey I have an oil leak coming from my oil filter housing, I have the new seal to replace it, what I want to know is how hard is it to remove this housing? How many bolts is holding it to the block or how do you remove it from the block to change the o-ring seal. Ant help would be appreciated as...- 1
- 50
-
Zachchanjzx81 · updated
Join now to ask and comment!