I use to have a SPI boost gauge with a factory green bulb which was a PERFECT match in color but the gauge itself was a POS. It was not accurate at all and the needle kept sticking to the face of the gauge. DOn't buy it but that's just my opinion.
All of my gagues match perfectly to my stock gagues...they are DEFI gauges. I have pics on my website...but they don't do justice for the gauges because the pics were taken at night...I am going to try and get better pics up of them shortly. http://home.talkcity.com/thepits/tt_6spd_black/index.html
Hi guys sorry to bother you on your
Supra thread. But I have an 02 Lexus is300 with aristo 2jzgte single turbo swap and was hoping you guys could help me out better then lexus forums.
I have a 02 lexus is300 with 2jzgte swapped engine. I recently installed a single turbo set up (6262)
So my Supra makes a high pitch sound from the (right) rear wheel every time it makes an entire spin. I think it might have something to do with the brakes because the sound goes away when I press on the brakes. Can anyone tell me what could be the problem?
Hi all, trying to remove the output shaft seal on my MKIV 6 speed. I am having an absolute btch of a time getting this seal out. I've cruised pretty much the entire forum regarding this issue but couldn't find any specific tips. I've been prying on it as hard as I can with hooks, as shown in...
Long post alert! :)
My car is an US TT, automatic. I’ve destroyed this transmission several times, it was last rebuilt less than 5K miles ago.
I’m not looking for any real power anymore, it is a single conversion but I have the boost so low I doubt it’s much higher power than BPU.
I'm about to install my new BC 272 cams. I need some guidance with aftermarket cams. I'm reading 2 or even 3 different ways to install them in the forums. Which is safest incase they do make the motor interference?.
Do I place crank 15deg BTDC, install the cams as per TSRM, lock...