Supra Forums banner
1 - 2 of 2 Posts

Senior Member
1,522 Posts
Discussion Starter · #1 ·
I going to head out to the dyno soon. My setup is dp, exhaust, rps kit with bb TSO4, hks evc, bcc, 2 blitz bov, stock ic, maf...etc. I am just looking for some advice or tips on tuning at the dyno. I know for starters that I'm running very rich with a single and maf. This is what I know so far......let me know what else I need to know. I set the S-afc a/f adj increments at 3500, 4000, 4500, 5000, 5500, 6000, 6500 and 7000. I plan on hooking up the wideband O2 sensor and try to get the Air/fuel ratio to 11.5 to 1. (changing it up or down when needed). I plan to keep it a little rich just for a couple of rpms when the turbo comes on hard. I am going to put in some 110 octane and run 22lbs of boost or so. I may or may not be able to bring a supra expert with me......if not I am going to go by myself.
Is there anything else to it........or is it as easy as I just described?
Thanks ahead of time!
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.