Supra Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
307 Posts
I had some problems with mine but they were all related to installation. One important thing though, I set mine to the 1996 Volt spec. I think it was 6.1V.

After checking the installation and leaving the volt out put at 6.1 V I have not have any problems.

The light thing you mention is rather weird.
Recommend going over installation, may be wires are connected to the right place but the splice and the taps are bad.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top