Supra Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
176 Posts
Discussion Starter · #1 ·
I'm putting a Greddy 3 row in but could not get the core to fit due to a fan causing interfirence (sp) between the aluminum bumper reinforcement and the fan.I ended up removing the fan is that normal for this install. The fan is for the A/C. My car is an auto-matic and the year is a 94.Has any one else have to remove the fan or was their clearance fine. Thanks
Wayne
 
G

·
I had the same problem when I installed it on my auto supra. It seems that the manual tranny supras don't have a fan on the AC condenser so they don't have this problem. I have had my FMIC for almost a year and haven't had any problems with it because of removing the fan so you should be fine.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top