Supra Forums banner
1 - 1 of 1 Posts

· Registered
527 Posts
Discussion Starter · #1 ·
My abs block has been sitting for 5 years or so while the car was being stored then built. IN bleeding the brakes we are unable to get the fluid through to all the calipers just the front right brake.

We have tested all electrical connections to the ABS block.
We have verified that fluid is making it from the master clynder to the block on both feed lines
we have verified that flyud comes out of the one hole through the ABS block that feeds the FR wheel.

Everything else is a mystery. Car is a 98. Could the block have something inside of it that is stuck for some reason??
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.