[ppalamara]

If so, what are your cam gear settings after degree'ing(sp) the cams? I just want to make sure I have the right settings.
Every car should in theory be the same spec + or - a degree for user preference. Thanx

 

[ppalamara]

No body?

 

[Mark Conte]

which are the stage 3 cams? are these the 284's or whatever or the 292's or 300's all of these have a very high lift and cause the 2jz to become an interference engine. most people also do not need anywhere near this much lift or duration. hks/jun 272's work fine up to 900-1000rwhp. and they only have approx 9.3mm of lift

 

[blackbird]

Just set the cam gears to 0 on both. Most people only see maby 2-4 hp change. the cams are already optimized.