Has anyone w/ an OBD2 supra swap MAFs w/ an OBD1?

1 - 1 of 1 Posts

William DMD

Registered

Joined Feb 18, 2001

196 Posts

Discussion Starter • #1 • Oct 29, 2003

I wanted to know if anyone that has an OBD2 supra TT has ever swapped their MAF with an OBD1 MAF and have any bad side affects..I've heard that they are different MAF's however I don't know the differences between them.

thanks

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

AEM V2 - Automatic Transmission Shifting Issues - Come on in!

MKIV Technical

I am helping a friend with an Auto supra running the AEM V2. I have searched the forum pretty extensively, and have not come up with a definitive answer on how to resolve this issue. We took the car out, and got the engine dialed. Runs great other than an issue with the car going 12.5-13:1 at...
- 4
- 2K
- turboegt · updated 14 h ago
After a pull car dies (AEM V2 Auto GTE)

MKIV Technical

AEM EMS V2, 2JZGTE, AUTO, Titan 3500 stall, Fic 750cc injectors,PT6266 turbo,etc. Just had the car tuned a couple days ago took it out on its maiden voyage tonight and i'm having issues. Doing a pull to maybe 5000rpm the car died on decel. Pulled into a gas station car cranked afew times before...
- 7
- 936
- F
  Flicktitty · updated 14 h ago
Transmission Shifting problems "fixed"

MKIV Technical

I have read through countless threads and this problem i have not noticed any answers to my situation. So when accelerating from a stop the car will not rev past 3500rpm before it shifts to another gear. this is a 94 tt auto car. If i put it in 1st and shift to 2nd manually with the shifter...
- 3
- 143
- 94tt v10killer · updated 2 d ago
Tremendous disaster

MKIV Technical

Hi: Let's see if anyone can explain what the hell happened here: This is my R154 shaft Opinions? Thanks
- 12
- 203
- A
  alex allende · updated 3 d ago
JDM 2jzge stalling issue MAP sensor locations/ ground locations

MKIV Technical

Hello everyone my car JDM 1993 supra SZ non turbo Automatic has a start stall condition or starts and as soon as throttle is applied it dies. A few months back the car ran fine then out of nowhere started misfiring so i pulled the plug wires and noticed there was oil in every cylinder which...
- 1
- 46
- B
  Buffy718 · updated 3 d ago