Joined
·
613 Posts
Do you have to pull the whole damn dash to replace heater core, its leaking.... or what do u do,?
Heater core ?
Join the discussion
Recommended Reading
-
My Supra Build (Need suggestions)
MKIII TechnicalI bought myself an 89' Supra N/A that had sat for 14 years in a drive shed without moving. Miraculously it started up without even needing a boost. As my build comes together slowly (thanks to tons of information I've found here and on Supramania). I'm finally at the point where I need to...- 2
- 286
-
ECUMASTERS EMU 7MGTE PnP help
MKIII TechnicalI bought this car running a 7M harness on a 2JZ-GE motor (SAFC2). It came with an ECUMASTERS EMU stand-alone with a PnP adapter. I asked the original owner why it wasn’t hooked up and he said he could never figure out how to make it work. The PnP adapter has bridged connections and I need some...- 0
- 45
-
BellsMK3 · updated
-
No spark on my 7mge
MKIII TechnicalMy 7mge does not throw a spark. I cleaned the intake and the valve covers, and changed the spark plug wires. After assembling, the engine did not start due to lack of spark, check the coil, relay, and ecu, all are running. What could be the problem? Any help is appreciated.- 3
- 102
-
1987 na supra atuomatic to manual swap.
MKIII TechnicalSo a little back information on this car. My son and I picked it up when he was 15 and now he is 20. There are a few threads on how we brought the car back to life and have done other things. here is one. https://www.supraforums.com/threads/87-supra-part-3-paint-the-car.1109813/post-13837471 So...- 3
- 188
-
1933beer · updated
-
Cannot attach airccon compressor to the block (7MGTE)
MKIII TechnicalGood afternoon, I'm in the process of putting back together a turbo 88 destined to the scrappy, and I've got most of it together except for the AC compressor. I've got it mounted onto its bracket, all the lines bolted on, but the holes don't quite line up perfectly with the ones on the block...- 7
- 365
Join now to ask and comment!