Supra Forums banner
1 - 4 of 4 Posts

·
1jz killer
Joined
·
328 Posts
Discussion Starter · #1 ·
ok here are my mods, 60 trim, greddy type S bov, spearco ic with custom metal pipes, intake, full 3" exhaust, ngk iridiums and wires. ok before i got in an accident i used stock piping and stock IC and was boostin 11 lbs, it pulled really hard, now with the new IC and pipes, i hit 11 lbs and it doesnt even pull at all, its weird, also when i rev it somtime the car will stall and die out. oh yea and i gutted my cat too, i also have no charcoal canister, or powersteering. it also backfires too, i have tightened the bov all the way down, somtimes if the egt are kinda high it would spit out fire when it backfires, so how do i tell if its a bad bov, or IC pipe leaks, this car isnt as fun as it used to be anymore =\.
 

·
Republican
Joined
·
8,421 Posts
wouldent tighten the BOV all the way, compresser surge could DISTROY your turbo...
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top