Supra Forums banner
1 - 6 of 6 Posts

·
J-Spec 4 Life
Joined
·
938 Posts
Discussion Starter · #1 ·
I'm installing a vehicle dynamics processor and need help with the following instructions

Read below

Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in REVERSE (R) position. If not connected, this unit does not work properly.

I need to know where I find this wire.

Thanks in advance
 

·
J-Spec 4 Life
Joined
·
938 Posts
Discussion Starter · #3 ·
are they under the center console by the gear shift?
 

·
Premium Member
Joined
·
10,088 Posts
Although I'm sure you could get a quick answer to this (including I could look it up for you), I'm going to tell you what I tell everyone else. If you are going to be working on your own Supra then buy the manuals. Call Jeff or Curt today and get them on order. They are ~$200 for the body, chassis, electrical, and engine manuals (2-3 books depending on the year of your Supra) and they are worth their weight in gold!! They will tell you how to find any wire in the Supra just for example.

Regards,

Dusty
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top