Help for set apexi AVC-R

1 - 1 of 1 Posts

ANDY W CHEN

Guest

Joined Jan 1, 1970

0 Posts

Discussion Starter • #1 • Jan 27, 2002

I had some thing wrong on my boost controller, when I set 1bar Set dety cycle 38%.

I drive on 4th gear to 6500rpm,I let off, screen show was 1.35bar

I try on 0.85bar but still have 1.33bar, I try manytime, not going

down bar,(Irun stock TT)please anyone can help.

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

Brake caliper colours - post your pics!

MKIV Technical

I am about to repaint my brake calioers. I’m looking for ideas (my car is white). Post your pics - try and show your car color - and let’s see what’s out there. I will post after pics when I have some ideas. Sent from my iPhone using Tapatalk
- 4
- 66
- F
  fants · updated 2 hours ago
Boost cut controller.. why no worky

MKIV Technical

Are you guys using a sensor ground for your bcc or chassis ground? I don't want to cut my harness so came up with this rough contraption. Something so simple yet 14-15 lbs boosts cuts every time. I started at 4.30v, kept turning it down after pulls to see if that was the case and nope still...
- 2
- 90
- C
  crazy3rdgen · updated 2 days ago
Help with Cams and shimless buckets 2JZ-GTE

MKIV Technical

Will be installing 272 BC cams, springs, retainers, keepers and of course those pesky oem seals. Still a bit confused on when I need to put motor at TDC since I am doing the "rope trick" does this matter? So would you do shimless buckets like this? Please correct if wrong. 1.Remove the...
- 1
- 113
- rallly · updated 3 days ago
Head gasket

MKIV Technical

Does this gasket look blown? enough to actually loose compression to zero?
- 2
- 191
- Kennygee · updated 3 days ago
Odometer problems need help!

MKIV Technical

So my odometer stopped working and i have resoldered it 2 times and everytime, it starts counting for about 5km and then stopps again. I have done the splice mod on the connector on the back also have tried putting it back to original and also tried removing my speedo converter but it didnt...
- 2
- 167
- Marcus.supra · updated 4 days ago