Supra Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,122 Posts
Doesn't the new harness plug in down farther on the trans hump? It doesn't plug into the factory plug that goes into the factory deck. Further down the harness you unplug a couple of connectors and put the new connector there. I know this has been discussed. I'll look around for a better explaination.

Ok, here is how I explained it to someone else a long time ago:

Don't plug into the connector attached to the deck. Look down on the right side under the radio on the transmission hump. There are a couple of connectors there that end up going towards the amp. Unplug and hook the new harness there.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top