Supra Forums banner
1 - 6 of 6 Posts

· Registered
Joined
·
1,286 Posts
Discussion Starter · #1 ·
I need a shop that does decent work in the Greater Boston Area. I live on the Cape if anybody is familiar with that area. My mechanic for over 10 years got into a really bad accident and I don't know if he will live let alone finish my GTE Head Swap. It's kinda a nightmare because my Standalone is ripped out of the car and I was going to put the Haltech E11v2 in but I will have to put the Accel DFI Back in. I will have to go back to the NA-T setup to get it running but at least it will be driveable. I have over 3K in parts that were ready to go into my Supra. I will have to go to the Machine shop to get my TT Head out and finish the valves and stuff. Any input would be helpful thanks again.
 

· Registered
Joined
·
539 Posts
so you need a machine shop? or a place to do the install?

i used a machine shop in middleboro, hes been there for 30+ years and all he does is engines. not a toyota specialist by any means but he does good work and decent prices too.
 

· Registered
Joined
·
1,286 Posts
Discussion Starter · #4 ·
I can take care of the machine work for the head. I just need a place to install the engine parts and engine management and do custom Fabrication work like weld a custom intake and front mount piping & Downpipe stuff and tune it.
 

· King of Snark
Joined
·
2,126 Posts
Pm me. I am working at a shop in bridgewater. I can see what I can do for you.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top