[James0598]

Hey guys, I just installed my GREDDY turbo timer and I cant get the think to work with my factory alaram? I looked in the sogi tech tips and it says "the GREDDY unit shuts off all ACC upon removal of the key" well, mine doesnt do that, the radio and such shuts off with the car. Any suggestions?

DO I cut the blue wire coming out of the turbo timer like the HKS?

 

[ryans_supra]

I just installed the turbo timer as well and upon removing the key from the ignition everything stays on, and shuts off when the car does. I don't think the timer was designed to power down all the accesories when turning the car off the ignition.

I don't see any benifit at all to cutting the blue wire, It was meant for Japenesse cars so leaving it there should be fine.

 

[conundrum07]

It wont hurt anything. Cut the blue wire to make the alarm work. I reccomend cutting it on the harness side to avoid hacking up the turbo timer wiring in case you decide to ever sell it.

 

[MrBoost]

The tip was written years ago for the old black-housing classic greddy TT. If the new ones keep the ACC on, yeah, snip the blue wire at the install harness.