help putting in cluster from right wheel

1 - 1 of 1 Posts

harut

Registered

Joined Jan 8, 2003

718 Posts

Discussion Starter • #1 • Oct 23, 2003

I needed a whole set of cluser for my car so I got it. But the trick is its off of a right wheel supra. The wiring is pretty confusing and mirrored around. I got the rpm, fuel, turn signals, and KPH working but not the rest (temp, lights). Any help on this would be great. This is for a 97 TT 6sp.

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

What did you do to your MKIV today

MKIV (1993-1998)

As many of you know I have great appreciation for the Supra especially the MKIV as it has always been one of my dream cars come true. I purchased my MKIV in September of 2006. I wanted to attend my first SILV in it in 2006, a good year for SILV as it was a big attendance. Although it was a rough...
- 5K
- 633K
- Rocketman1000R · updated 3 h ago
Any successful 6R80 swaps into an MKIV yet?

MKIV (1993-1998)

I know there was some talk at one point, but has there been any successful 6R80 swaps into a MKIV yet? We know the stock 6R80 can handle plenty of power, the mustang guys see plenty of 10 sec passes and even some into the 9s. We know the tunnel will need a massage, we know there's the...
- 42
- 5K
- Casey James · updated 3 h ago
Jdm 2jz ge non vvti code 24/31 start & stall

MKIV (1993-1998)

anyone know what could going on? car starts idles high then stalls almost immediately or as soon as you press throttle stalls. JDM 2jzge non vvti. installed new plugs new wires distributor cap rotor button valve cover gaskets to no avail. car is throwing codes 24 & 31 but my car doesn't have a...
- 0
- 15
- B
  Buffy718 · updated 5 h ago
AEM Infinity 506 and fuel pump wiring HELP

MKIV (1993-1998)

Hey guys, about to install my AEM infinity 506 on my 1993 JDM RHD supra 6 speed turbo. I had the AEM V1 for 3 years and it's time for a change. Currently have a walbro 450 pump in 12V mode (no relay) just spliced 2 wires together by the fuel pump ECU. Was installed like this by a shop. I have...
- 0
- 13
- D
  dus · updated 5 h ago
Put on pulled off head gasket

MKIV (1993-1998)

New to the forum but have a question about reusing a head gasket. I bought a 2jz ge engine and the previous owner was going to put a turbo on it so he had the head all redone, springs, valves the works and put the redone head on the old ge block with a new GTE head gasket. When I bought the...
- 1
- 50
- Hairry7899 · updated 7 h ago