Supra Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
595 Posts
Discussion Starter #1
ok heres my problem. if i hit the button to turn the cruz controle on it lights ip on my dash. but then when i try to set it nothing happens. its been like this ever since i got the car. it worked for like a week but would turn off randomly. is there a fuse for it somewhere because i couldnt find one? also have any of you guys had this problem before and might know where a lose connection could be?

any help is good help! thanks guys



p.s. i have a 12 hour drive on thursday morning so i really would like this workin!!
 

·
Banned
Joined
·
338 Posts
yeah your speed sensor is possibly bad and also does your over drive light flash sometimes while driveing with in on, i am current have this problem and my curise control doesnt work either but the light turns on in the gauges.
 

·
Wingless Hardtop Moderator
Joined
·
3,090 Posts
Definetly speed sensor.. you have to re solder everything behind your dash pretty much.. look for the tech article on MKIV.com, its all there.

Denso did a shitty job on the initial solders so they dont last too long.
 

·
Registered
Joined
·
82 Posts
read the post that was just posted about od light flashing.
i did it and my CC works!
 
1 - 7 of 7 Posts
Top