help with my bcc | Supra Forums

1 - 1 of 1 Posts

U

Ucntcachme

·

Guest

Joined Jan 1, 1970

·

0 Posts

Discussion Starter • #1 • Feb 16, 2002

i installed my greddy bcc the other day and now my check engine light comes on, the traction control turns off and the warning light comes on. I did it exactly the way it was show on mkiv.com i even trippled checked my self to make sure all the wires were correct. Can someone please tell me whats goin on. thanks.

[email protected]

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

HELP installing 272 Cams

MKIV Technical

After I have installed all the new seals, BCsprings, retainers, locks and buckets, with T-belt off, put crank at -10 btdc so all pistons are slightly down, install new BC 272 cams, install cam gears, torque cams as per manual. Then turn CAMS clockwise to tdc notches, and than turn CRANK to tdc...
- 4
- 71
- rallly · updated 2 days ago
Rhd jza80 HID kit

MKIV Technical

Recently acquired a rhd supra and slowly starting the process of swapping things over. Got myself some glass headlights and wanted to swap bulbs while I’m at it. Been told jdm lights differ from usdm. Hard finding more info on this. Thoughts? Trying to find a quality hid system, seems LED isn’t...
- 3
- 196
- C
  cantdrift · updated 2 days ago
2JZ-GTE Igniter - Required when you go to a aftermarket harness + ECU

MKIV Technical

I came across asking myself today, do you need a igniter when you go to a aftermarket ECU and Harness? I noticed my friend is running a MOTEC and does not have one for his car.
- 2
- 255
- P
  PushLimits · updated 4 days ago
98 Taillight LED bulbs?

MKIV Technical

Hey guys, Just installed a pair of S2 taillights on my 93 Supra RZ. I would like to convert to LED. I would like to purchase from here as the prices seem very good. https://www.superbrightleds.com According to my search in the Forums, looks like I need 2 x 7440 and 2 x 7443 bulbs Just not...
- 3
- 115
- rallly · updated 6 days ago
Low boost after high boost spikes

MKIV Technical

Hey guys, I had a boost leak on my 94 BPU for years and didnt notice it because I still got good boost. So I finally fixed it but forgot to turn my boost controller down. I hit 25 psi 2 or 3 pulls without realizing it. Since then it wont go much over 14 psi anymore. I did a boost leak test for...
- 1
- 133
- D
  Disguised · updated 6 days ago

Join now to ask and comment!

Top