Supra Forums banner

1 - 5 of 5 Posts

·
Sexy Bitch
Joined
·
392 Posts
Discussion Starter #1
Need help guys.

I'm pulling my 7m-gte. Manual transmission. First time...

Can't seperate the motor from the tranny. Opened up the transmission cover plates and found the clutch fork. HOW THE HELL DO YOU GET THIS OUT. Its my understanding that this has to be removed before i can seperate the motor from the tranny. Can someone please tell me if i need to remove this, and if so, HOW?

Is there anything else i need to remove? The Haynes manual i'm using is worthless...

Any help is appreciated! Thanks...
 

·
Republican
Joined
·
8,421 Posts
^ yep.. pull hard and yank it around (the clutch fork)
 

·
Sexy Bitch
Joined
·
392 Posts
Discussion Starter #4
I see two bolts holding the clutch fork on. Is that all i need to take off to remove the clutch fork? Whats the easiest way to take the bolts out? I got one almost off, but the 2nd bolt i can't seem to get to. Any suggestions? Once the fork is off, is there anything else i have to do, or will the motor slip off?
 

·
Sexy Bitch
Joined
·
392 Posts
Discussion Starter #5
Well, did some searching and found that i'm not the only idiot who's asked this question. I guess i just need to remove the C clip, pull that pin out of the fork and it just comes out...
 
1 - 5 of 5 Posts
Top