Supra Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,437 Posts
green_banana said:
save yourself some bucks and make your own out of 8 gauge power cable and wire connectors.
Ill even make a write up..... :
1) Measure wire span distance with string.
2) Cut wire to previously mesured length.
3) Strip ends
4) Stick some circular connectors on the end
5) Mash the connectors on good and hard with some pliers.
6) Crack open a cold one and reflect on the money you saved, and the:gaysex: colors you avoided displaying all over your engine bay.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top