Supra Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
950 Posts
TaintedSC said:
Hey MONSTER, I'm actually in the middle of doing mine ( HKS ) and know what u mean about the stripped screws and such. Anyway was curious if you got any error/warning lights because of the disconnected sensor and motor. Just wanted to know if everything was fine after the install, should have mine done tonight. thx
I'm also working on mine. Any issues with removing the trac motor and disconnecting the sensor? I saw a post some time ago and both were removed. The owner put a aluminum plate where the motor use to sit.
 

· Registered
Joined
·
950 Posts
2JZ-GTE said:
Do you have to remove the throttle body to complete this mod??

I recommend it. Chances are you'll have to drill out the two brass screws that hold the plate in place. They're a real pain to get out. Both mine snapped in the middle of the threads and from what I've read everyone else seems to have had the same problem. You'll want to make sure you get all the metal filings out. Good luck!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top