[farmerboy]

I searched a little and found some problems with rattle but in the complete opposite pedal posisitions.

Is it normal for the clutch to rattle when I have the pedal depressed. It doesn't rattle when the clutch is out. Figuring it is my throw out bearing but not real sure.
I bought the car with the clutch already installed with around 14k on the clutch.

 

[Nick 95 6sp]

I have the HKS triple and it uses the throwout bearing from a MkIII; pretty sure the twin disk does too. My TOB has rattled from day one when the clutch pedal is pressed, but as far as I know it's normal for this setup. I've been beating on the clutch (no drag strip action though) including many laps on road courses for over 4 years/close to 60k miles and the clutch feels at least as good as the day it was installed, actually better with age.

 

[pwpanas]

...Is it normal for the clutch to rattle when I have the pedal depressed.

Yes, the three clutch disks and two floater plates rattle when the clutch is depressed, every time there is a slight rpm change in the engine.

 

[blkdawg]

Is it normal for the clutch to rattle when I have the pedal depressed.

yeah that's normal.
TRD twin is opposite, it rattles with the clutch out.

 

[farmerboy]

Thanks guys, that relieves my worries. Glad I learn something new everyday.