J
jovis465
·Guest
Joined
·
0 Posts
Is it hard to hook up a Greedy fMIC by ones self?
Hooking up an intercooler ...?
1 - 5 of 5 Posts
J
jovis465
·Guest
Joined
·
0 Posts
ANY CONFUSING STEPS OR JERRY RIGS for hooking up a greddy three row?
J
jovis465
·Guest
Joined
·
0 Posts
can it be easily done without any directions???
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
Fuel door on widebody supras
MKIV TechnicalFor people with widebody supras, did you connect the cable release for the fuel door? Or did you leave it disconnected and just pull it open with your hand? Mine was left disconnected and I was wondering how the cable can be modified to work with the new bodykit. Thanks- 1
- 161
-
High rpm breaking up 97 supra 6psi
MKIV TechnicalWell I’ve been reading all this post about ignition breakup at 15 -20psi and spent a good amount of hours reading and then trying things here and there. Well this is my problem it’s a 97 supra gte/w58 with an aem v2 with an sxe 366 ONLY doing 6 psi(STILL ON A W58). It will be fine in 2nd gear go...- 17
- 409
-
Performance shops in VA/MD
MKIV TechnicalCan someone help me out I’m looking for a good shop near Newport News area or Baltimore area that specializes in supras. I’m will to travel an hour and half away tops in both areas. During the week I’m in VA and weekend MD. I just want a look over make sure there’s no major issues that I...- 0
- 44
-
Need help! Bought doors with deleted door handles
MKIV TechnicalHello! I recently bought a jza80 supra! I was super siked about it! But it was not perfect. The passenger door was totally busted! So I bought some doors off of a nice german guy but upon further inspection I found out that the outside door handles where welded shut and painted over. So now I’m...- 3
- 159
-
Haltech elite 2500 plug and play patch HELP for JDM 2jzgte
MKIV TechnicalHello, I will be purchasing a 2500 elite series ecu kit. Its the HT-151342 I own a JDM 1994 Supra RZ 6spd. I'm told the patch harness that comes with this is suited for the USDM cars. What exactly do I need to do to my JDM 2jzgte engine harness so that the ecu works as it should. Thanks!- 0
- 58
-
rallly · updated
Join now to ask and comment!