[charlesbboy]

when i installed my BLITZ blow off valve on my car,after the 3000 pipe,I cant find any replacement for my stock bov ,i went to a local car store and i installed the hose but it "kinks"and also i went to TOYOTA and they only have the hose that connects to the stock bov
does anyone know where i can get the hose where my stock bov was (just a hose that doesnt kink and is bent that way)

 

[[email protected]]

wtf are you talking about?

 

[conundrum07]

If you are removing the stock valve, you are going to want to cap the ends, not connect them with a hose. If you connect them, you would have a serious boost leak!

 

[jcrapps]

yeah, use a bolt or cap to cap the hole in the accordian hose and the 3000 pipe's hole. Then you'll be alright.

 

[supragook]

yep.....i went to oreilly's and got a rubber plug to stick in the holes...then i jus put a rubber cap over the whole thing with at clamp and bam all done.....works fine

 

[Trent]

Go to AutoZone into the HELP! aisle and look for vaccuum caps. They will be the biggest they sell which should be 5/8". Then cap off both ends and clamp them down and you are done.