Supra Forums banner
1 - 8 of 8 Posts

·
1400rwhp/8 Sec Club
Joined
·
2,831 Posts
you mean the rear axles??

you undo the 10mm hex head bolts going into the rear end. Take off the wheel and undo the big nut on that side. Slide the axle out. :)
 

·
Registered
Joined
·
4,897 Posts
you don't need to buy any special tools, just use a piece of wood or put the nut back on the threads so it is flush, then knock it out with a hammer.
 

·
Supra Owner Since 1996
Joined
·
2,715 Posts
It's pretty straight forward. Just be aware the two axles are different lengths. You will have to unhook a suspension arm, making it easier to swing out the wheel hub and put the axle thru. This is assuming you hook the axle to the 3rd member first. I do beleive the axle nut is a 32mm.
 
1 - 8 of 8 Posts
Top