Supra Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
372 Posts
Discussion Starter · #1 ·
Alright guys/gals, I've been getting a lot of PM's so here's a repost

*****ARMREST Nice Cheap Fix*****

Things you need:

2 black shelf clips - .07 each
2 little screws .05 each
mini phillips screw driver - .50
needle nose pliars - 1.00
and a brain (priceless) :)

1-Take the top lid off (mine was already broken off)
2-Take the little pins out with the pliars (pull them off to the sides)
3-Put the self clips where the pins where then put the pins back in
(this because the pins don't have enough room to fit)
4-Hold the Lid where you want it and screw them on the plastic bracket

Wahllah!





Enjoy! - HOPE THIS SOLVES YOUR PROBLEM
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top