[Frankenstein]

What terminals do I have to set to put the car into default timing mode (so that there is no computer controlled advance, etc). BTW - I have a 2JZ-GE.....

 

[Frankenstein]

Bump...

I know most of you guys in here are TT and have no distributer, but someone must know what pins to jump in order to get into default timing mode.

Thanks.

 

[Frankenstein]

Bump up the jam...

Last call for help. Tomorrow I will harass my toyota dealer if I don't hear anything Thx.

 

[moua4c]

under the hood there is the little plug on the passenger side, use a paper clip and connect "Tec" and "ec" . THis should do the trick for timming..

This is how i adjusted my timimg. Let me doubble check this for sure first..

 

[moua4c]

I am sorry , it's the "Te1" and the "e1" terminals in the plug. look at the link here..
http://mkiv.christurner.net/manual/manualtt/ignition_timing_inspection/index.html