Supra Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,913 Posts
Go to NAPA and buy an ultra heavy duty T-bolt hose clamp. You can see some similar ones (from Turbonetics) on my pipes in the pictures at:
http://www.mkiv.com/readersrides/readersrides/steve_hayes/index.html

Before you re-install the hose, clean the inside of the hose and the outside of the pipe with a good solvent (carburetor cleaner will work) to remove any oil that may be on the surfaces. (If you do this, you may not even need the T-bolt clamp.)

Steve
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top