Idle control
Join the discussion
Recommended Reading
-
Help identifying modded ecu (G-Force?)
MKIV (1993-1998)So my aristo ecu took a crap on me and I bought a JDM mk4 supra 6sp ecu. To my knowledge the JDM supra is map based with 440cc's so I technically should be able to run the ecu. The seller that I received the ecu from stated it's a G-Force ecu. From other G-Force ecu's that I have seen on the...- 11
- 5K
-
ATLspeed · updated
-
Exhaust Manifold Bolts with no washer?
MKIV (1993-1998)Hi Supraforums family, Is it okay to use exhaust manifold bolts without a washer or lock washer? Or, will they eventually back out or cause problems when the meta expands. I don’t have studs for all the exhaust manifold holes, so I just want this to work, but be safe too.- 2
- 85
-
BW S366 question
MKIV (1993-1998)Hi everyone, this question is for anyone who may be using or has used the borg warner turbos Can the .91 A/R turbine be exchanged without replacing the turbine wheel? let say dropping it down to .82 A/R ? I know that its sold with .92 hot side- 2
- 86
-
2jzgte77 · updated
-
Stalling idle after single turbo install
MKIV (1993-1998)I finished installation of my PHR 6266 kit, and precision intercooler. Now I cannot get the supra to maintain idle. Upon start I have to hold the throttle some to keep it running. Boost gauge shows -10 vacuum at 1000RPM with throttle held to maintain. If I release throttle idle is nonexistent...- 6
- 135
-
Whining Noise using Jacks Transmission Parts
MKIV (1993-1998)Hi everyone, posting on behalf of a friend. He has rebuilt his V160 using Jacks Transmission Input Shaft and 5th gear. Rest of the transmission has been rebuilt using OEM parts. Transmission is shifting and running very smoothly. However, every gear except 5th gear makes a loud whining noise...- 13
- 1K
Join now to ask and comment!