Supra Forums banner
1 - 3 of 3 Posts

· going broke fast
Joined
·
2,469 Posts
6 bolts hold the flywheel and pressurplate,you have to unbolt it and slide the clutch,pressureplate toward the trans.they should have manuals online,i paid 80$ for mine brand new and my nose is in it all the time
 

· going broke fast
Joined
·
2,469 Posts
i asked about this before when i did my flwheel and everybody was saying 7m torque specs were good
flywheel to crankshaft 54 ft/lbs
pressure plate to flywheel bolts 13 ft/lbs
release fork to clutch housing 29 ft/lbs
clutch master 18 ft/lbs
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top