I'm getting condensation in headlights after having them on in cold weather
1 - 2 of 2 Posts
Joined
·
452 Posts
check the bulb connectors and make sure they're on tight.
not sure if its a common problem but check this thread out. it might help you.
http://www.supraforums.com/showthread.php?s=&threadid=17043
not sure if its a common problem but check this thread out. it might help you.
http://www.supraforums.com/showthread.php?s=&threadid=17043
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Brake caliper colours - post your pics!
MKIV TechnicalI am about to repaint my brake calioers. I’m looking for ideas (my car is white). Post your pics - try and show your car color - and let’s see what’s out there. I will post after pics when I have some ideas. Sent from my iPhone using Tapatalk- 4
- 66
-
Boost cut controller.. why no worky
MKIV TechnicalAre you guys using a sensor ground for your bcc or chassis ground? I don't want to cut my harness so came up with this rough contraption. Something so simple yet 14-15 lbs boosts cuts every time. I started at 4.30v, kept turning it down after pulls to see if that was the case and nope still...- 2
- 90
-
Help with Cams and shimless buckets 2JZ-GTE
MKIV TechnicalWill be installing 272 BC cams, springs, retainers, keepers and of course those pesky oem seals. Still a bit confused on when I need to put motor at TDC since I am doing the "rope trick" does this matter? So would you do shimless buckets like this? Please correct if wrong. 1.Remove the...- 1
- 113
-
rallly · updated
-
Head gasket
MKIV TechnicalDoes this gasket look blown? enough to actually loose compression to zero?- 2
- 191
-
Kennygee · updated
-
Odometer problems need help!
MKIV TechnicalSo my odometer stopped working and i have resoldered it 2 times and everytime, it starts counting for about 5km and then stopps again. I have done the splice mod on the connector on the back also have tried putting it back to original and also tried removing my speedo converter but it didnt...- 2
- 167
-
Marcus.supra · updated
Join now to ask and comment!